Difference between revisions of "MOD Duo User Guide"

From MOD Wiki
Jump to navigation Jump to search
(Major refactor: Merge with the manual document content)
Line 7: Line 7:
 
The wireframe images below expose the controls and inputs/outputs that the MOD Duo has.  
 
The wireframe images below expose the controls and inputs/outputs that the MOD Duo has.  
  
[[File:device_wireframe_top.png|600px|thumb|none|Wireframe of the top-view, exposing the two footswitch-LED-pairs, the two knobs, the two displays, the two inputs with peak-LEDs, two outputs with peak-LEDs and the headphone output]]
+
[[File:duo-overview.png]]
[[File:device_wireframe_back.png|600px|thumb|none|Wireframe of the back-view, exposing the power supply input, control-chain port, USB-A host port, USB-B slave port and a DIN-MIDI input/output pair]]
 
  
 
=Device features=
 
=Device features=
Line 14: Line 13:
  
 
==Inputs and outputs==
 
==Inputs and outputs==
===Audio inputs===
+
 
 +
[[File:duo-manual-2.png]]
 +
 
 +
To ensure a safe connection, follow the steps below.
 +
 
 +
# Turn down the volume of your amp and connect it to the OUTPUT jack(s)
 +
# Connect your instrument(s) to the INPUT jack(s)
 +
# Turn on the MOD Duo by plugging in its power adapter
 +
# Wait until the MOD Duo boots up
 +
 
 +
 
 +
===Inputs jacks===
 
The MOD Duo has two independant audio inputs, with configurable input gain for each input. You can set up the input gain through the device menu.  
 
The MOD Duo has two independant audio inputs, with configurable input gain for each input. You can set up the input gain through the device menu.  
  
===Audio outputs===
+
===Output jacks===
 
The MOD Duo has two independant audio outputs, with configurable output gain for each outut. You can set up the output gain through the device menu.  
 
The MOD Duo has two independant audio outputs, with configurable output gain for each outut. You can set up the output gain through the device menu.  
  
===Headphone output===
+
===Headphone jack===
 
The headphone output on the MOD Duo usually monitors output 1 and 2, although it can also be set up to monitor the inputs directly through the device menu. It is also possible to set the volume level of the headphone output through the device menu.  
 
The headphone output on the MOD Duo usually monitors output 1 and 2, although it can also be set up to monitor the inputs directly through the device menu. It is also possible to set the volume level of the headphone output through the device menu.  
  
===Power input===
+
===Power jack===
 
The MOD Duo comes with its own approved power supply which outputs 12V, 2A over a center-positive barrel-type plug.  
 
The MOD Duo comes with its own approved power supply which outputs 12V, 2A over a center-positive barrel-type plug.  
  
Line 30: Line 40:
 
The power consumption of the MOD Duo varies depending on the peripherals connected to the device. For example: Hooking up a USB-hub to the USB-A port, and then hooking up multiple MIDI controllers to the hub will change the power requirements. By using the provided power supply you are sure that you will never run out of juice.  
 
The power consumption of the MOD Duo varies depending on the peripherals connected to the device. For example: Hooking up a USB-hub to the USB-A port, and then hooking up multiple MIDI controllers to the hub will change the power requirements. By using the provided power supply you are sure that you will never run out of juice.  
  
===Control chain===
+
===Control Chain port===
 
TODO: explain use for CC, advantage over MIDI
 
TODO: explain use for CC, advantage over MIDI
  
 
NOTE: Please do NOT connect this port to a regular Ethernet port, it can damage your MOD Duo.
 
NOTE: Please do NOT connect this port to a regular Ethernet port, it can damage your MOD Duo.
  
===USB-A host===
+
===USB Host port===
 
In the most common scenario, this port is used to hook up a single USB-MIDI device, such as a MIDI-keyboard to control generator plugins.
 
In the most common scenario, this port is used to hook up a single USB-MIDI device, such as a MIDI-keyboard to control generator plugins.
  
Line 42: Line 52:
 
NOTE: The port can also be split up into multiple ports using a USB-hub for connecting multiple USB devices to the MOD Duo.
 
NOTE: The port can also be split up into multiple ports using a USB-hub for connecting multiple USB devices to the MOD Duo.
  
===USB-B slave===
+
===USB computer port===
 
This port is mostly used to connect the MOD Duo to your PC for setting it up. When executing a manual system update, its use changes to a mass-storage device, so that you can copy the update-file to the MOD Duo.
 
This port is mostly used to connect the MOD Duo to your PC for setting it up. When executing a manual system update, its use changes to a mass-storage device, so that you can copy the update-file to the MOD Duo.
  
===DIN-MIDI===
+
===DIN-MIDI I/O===
 
Finally, the MOD Duo also supports old-school DIN-MIDI devices, simply hook up your DIN-MIDI device to the appropriate port on the back and enjoy!
 
Finally, the MOD Duo also supports old-school DIN-MIDI devices, simply hook up your DIN-MIDI device to the appropriate port on the back and enjoy!
  
Line 52: Line 62:
  
 
The two knobs are used to access and navigate the device menu and tuner. They can also be freely mapped to the parameters of the plugins running inside the MOD Duo, through the web interface.  
 
The two knobs are used to access and navigate the device menu and tuner. They can also be freely mapped to the parameters of the plugins running inside the MOD Duo, through the web interface.  
 +
 
===General knob actions===
 
===General knob actions===
 
*Turn a knob to change the value of the parameter assigned to it
 
*Turn a knob to change the value of the parameter assigned to it
 
*Press a knob to cycle through the list of parameters assigned to it
 
*Press a knob to cycle through the list of parameters assigned to it
 +
 
===Left knob actions===
 
===Left knob actions===
 
*Hold the left knob to access and exit the device menu
 
*Hold the left knob to access and exit the device menu
 
*Turn the left knob to scroll through the device menu
 
*Turn the left knob to scroll through the device menu
 
*Press the left knob to enter the selected sub-menu or toggle the selected option
 
*Press the left knob to enter the selected sub-menu or toggle the selected option
 +
 
===Right knob actions===
 
===Right knob actions===
 
*Hold the right knob to access and exit the tuner
 
*Hold the right knob to access and exit the tuner
Line 64: Line 77:
  
 
The two footswitches can be used to navigate through the pedalboards that are inside a bank (when set up that way). They can also be freely mapped to the parameters of the plugins running inside the MOD Duo, through the web interface.
 
The two footswitches can be used to navigate through the pedalboards that are inside a bank (when set up that way). They can also be freely mapped to the parameters of the plugins running inside the MOD Duo, through the web interface.
 +
 
===General footswitch actions===
 
===General footswitch actions===
 
*Press the footswitch to change the value of the parameter mapped to it
 
*Press the footswitch to change the value of the parameter mapped to it
 +
 
===Switching pedalboards with the footswitches===
 
===Switching pedalboards with the footswitches===
 
When switching pedalboards with the footswitches is enabled through the web interface:
 
When switching pedalboards with the footswitches is enabled through the web interface:
Line 79: Line 94:
 
*height: 74.7 mm
 
*height: 74.7 mm
  
==Audio flow==
+
==LED Audio meters==
The graphic below represents the signal-flow of the audio inside the MOD Duo.
 
 
 
[[File:Device_audioflow.jpg|thumb|none|700px|Audio flow inside the MOD Duo]]
 
 
 
Please note the position where the LED meters read from.
 
  
 
The LED colors represent the following input levels:
 
The LED colors represent the following input levels:
Line 94: Line 104:
 
*Blinking strong red: 0dB (CLIPPING!)
 
*Blinking strong red: 0dB (CLIPPING!)
  
Important conclusions:
+
=Adjusting Volumes=
  
*The [[Chapter_1:_Device#Volume_and_gains|input gains accessible via the menu]] - both stage and fine adjust - determine the level of the analog signal coming to the ADC. This is 100% analog.
+
The MOD Duo allows each input and output volume to be individually adjusted. To access the '''Volume and Gains''' menu, first press and hold the left knob for one second. The '''SETTINGS''' menu will show up, now turn the left knob to select the '''Volume and Gains''' option and finally short press the knob to access it.  
*The [[Chapter_1:_Device#Volume_and_gains|output volume accessible via the menu]] does not affect the running pedalboard and can't help in case it is clipping. You can solve clipping by reducing the volume inside the pedalboard.
 
  
=Device menu (HMI)=
+
[[File:duo-manual-3.png]]
The device menu, or as we call it, HMI (Human Machine Interface), allows you to change settings on the MOD Duo. It also allows you to access different banks, pedalboards and the tuner.
 
  
The device menu can be accessed by holding down the left knob for one second.  
+
In the Volume and Gains menu, turn the knob to select the input or output you want to adjust and short press the knob to access it.
  
Navigation is done by rotating the left knob until the desired section is highlighted. Click on the left knob to enter the highlighted section.
+
==Inputs==
  
When you are done, you can either navigate to "Back to SETTINGS" and click on the left knob to go back to the device menu. Or you can hold down the left knob for one second to exit without going back to the device menu.  
+
The options for adjusting the inputs are '''Stage''' and '''Fine Adjust'''.  
  
==Banks==
+
The '''Stage''' menu allows you to adjust the gain stage of the selected input. Inside of the '''Stage''' menu there are 3 options: '''Low''', '''Mid''' and '''High''', representing the following input gain levels:
If you want to use the MOD Duo without being connected to a computer, this is a very important section.
+
* Low = -22dB
 +
* Mid = -9.5dB
 +
* High = +3dB
  
Upon entering this section, you will see the banks that you have created using the web interface, as well as a bank that contains all your pedalboards, named "All".
+
You should select the gain stage that best applies to the instrument you have connected. Short press the knob to activate the selected gain stage.
  
By navigating to a bank and clicking on the left button, you can browse the pedalboards within that bank. Navigate to the pedalboard of your choice and click the left button to load that pedalboard, and make the bank the currently active bank.  
+
[[File:duo-manual-4.png]]
  
From this point onwards, you can use multiple ways of navigating through the pedalboards in the active bank:
+
Once you have chosen the desired '''Stage''' value you can return to the previous menu by selecting the '''Back to ...''' option.
# Repeat the procedure to navigate to and select a different pedalboard
 
# Use the footswitches on the MOD Duo to cycle through the pedalboards inside the currently active bank (only if set up through the web interface)
 
# Use MIDI program changes to select the currently active bank (only if set up through the web interface)
 
  
==Current pedalboard==
+
The '''Fine Adjust''' menu allows you to adjust the gain of the selected input. You should turn the knob until you get the desired value.
If you have made some changes to some parameters of your pedalboard, and you want to save those changes for the next time you load the pedalboard, you can enter this menu and select and click on "Save State". This is especially useful for use without a computer.  
 
  
If you have made some changes, but you are not quite happy with the result, there is also a "Reset State" command. This command will return your pedalboard to the original saved state.
+
[[File:duo-manual-5.png]]
  
==Volume and gains==
+
Simply short press the knob to return to the previous menu.
This section allows you to set the gain for the inputs and level of the outputs. The headphone has its own section, so check out the "Headphone" section for information about the headphone volume levels and settings.  
 
  
When you notice that the LED's at the input side are blinking bright red, that means that your input signal is "clipping". In general, that is not a desired condition. Luckily, it can easily be resolved by lowering the input gain. Try a different gain-stage for the clipping input, or use the "Fine Adjust" option to take smaller steps.
+
==Outputs==
  
The gain stages represent the following input gain:
+
The '''Output''' menu has only one option, which allows you to adjust the attenuation of the respective output. Turn the knob to adjust the value. To return to the previous menu simply short press the knob.
*Low: -22.0 dBu
 
*Medium: -9.5 dBu
 
*High: +3.0 dBu
 
  
For the outputs there is only a simple volume control, going from 0 (unity gain) all the way down to -127.0 dBu. It is recommended to keep the outputs set to unity gain, and resolving clipping on the outputs by reducing the gain in the pedalboard.
+
[[File:duo-manual-6.png]]
  
 
==Headphone==
 
==Headphone==
In this section you can change the settings for the headphone output.
 
  
By entering the "Volume" sub-menu you can set the volume from -33dBu to +12dBu.  
+
In the '''SETTINGS''' menu you can access the Headphone option and adjust the volume of the headphone output. The volume can be adjusted from -33dB to +12dB.
 +
 
 +
[[File:duo-manual-7.png]]
 +
 
 +
Simply short press the knob to return to the previous menu.
 +
 
 +
There is also the option to enable the '''Direct Monitoring'''. By enabling the direct monitoring the headphone will work as a monitor for the dry sound coming into the MOD Duo. To toggle the monitor between '''ON''' and '''OFF''' press the knob while the '''Direct Monitoring''' option is selected.
 +
 
 +
[[File:duo-manual-8.png]]
 +
 
 +
=Tuning=
 +
 
 +
The MOD Duo has a built-in chromatic tuner which can be accessed by pressing and holding the right knob for one second. Both inputs can be used as the tuner input, to select between them short press the right knob. To exit the tuner press and hold the right knob for one second.
 +
 
 +
If you see a question mark on the tuner screen, it means the MOD Duo is not receiving any input.
 +
 
 +
[[File:duo-manual-9.png]]
 +
 
 +
To tune a guitar, play an unfretted note on a string and tune it until you see the correct note on the display. When the background of the rectangle becomes black the string is in tune. Each vertical bar represents 10 cents. The first bar, to the right or left of the central rectangle, is filled when the signal is between 1-10 cents out of tune, the second bar when it is 11-20 cents out of tune, and so on, and so forth.
 +
 
 +
[[File:duo-manual-10.png]]
  
By enabling the "Direct monitoring" option, your headphone output will work as a monitor for the dry sound coming into the MOD Duo.
+
=Playing=
  
==Bluetooth==
+
After you have powered on and adjusted the volumes of your MOD Duo, it is ready for playtime. The MOD Duo comes with many pedalboards ready to be used. They are organised in banks and can be accessed via '''SETTINGS''' menu.
This section allows you to check the status of, and set up your Bluetooth connection.
 
  
For more information about this menu see the dedicated [[Bluetooth]] wiki page.
+
==Loading a pedalboard==
  
NOTE: in order to use Bluetooth it is required to insert a Bluetooth dongle (version 3.0 or higher) in the USB A port of the MOD Duo.
+
In order to load a pedalboard, first access the '''SETTINGS''' menu by pressing and holding the left knob for one second, then select the option '''Banks''' with a short press.  (TODO: link to how to set up banks on GUI)
 +
 
 +
[[File:duo-manual-11.png]]
 +
 
 +
Once you have the '''Banks''' menu open, you can select any bank according to your preference. The name of each bank should give you an idea of the style of the pedalboards it stores. A short press on the knob will open the selected bank showing the pedalboards inside of this bank.
 +
 
 +
[[File:duo-manual-12.png]]
 +
 
 +
To load a pedalboard, make your selection by turning the knob, followed by a short press on the knob. Each time you load a pedalboard you can try how it sounds and once you find a pedalboard that you like, you can exit the '''Banks''' or '''Pedalboard''' menu by pressing and holding the left knob for one second.
 +
 
 +
==Adjusting pedalboard parameters==
 +
 
 +
As you might have noticed already, the default view of the displays shows the assigned parameters of the plugins for the current pedalboard. You will learn more about assigning parameters in the next chapter.
 +
 
 +
These parameters you see on the displays were considered important to be accessible to the user when the pedalboard is loaded. To adjust the value of each parameter you just need to turn the knob until the desired value is reached. More than one parameter can be assigned to the same knob, to cycle between them, short press the knob. On the top-right corner of each display you can see the index of the parameter being adjusted and the amount of assigned parameters on this display.
 +
 
 +
[[File:duo-manual-13.png]]
 +
 
 +
After you have changed the values you might want to save or reset them. The reset will restore the last saved values for all assigned parameters, while the save option will save the current parameters values to the current pedalboard. To access these options, press and hold the left knob for one second to open the '''SETTINGS''' menu, then turn the knob moving the selection until '''Current pedalboard''' option and short press the knob to select it.
 +
 
 +
[[File:duo-manual-14.png]]
 +
 
 +
Inside the '''Current pedalboard''' option there are two options: '''Save State''' and '''Reset State'''. Turn the knob to select the desired option, and short press the knob. Finally, confirm the action by selecting '''YES''' in the pop up dialog, and short pressing the knob. To exit this menu press and hold the left knob for one second.
 +
 
 +
=Editing=
 +
 
 +
==Accessing the graphical interface==
 +
 
 +
The MOD Duo has a built-in graphical user interface (GUI), which means you don’t need to download any extra software in order to configure the device. To access the interface, you only need a web browser, such as Chrome, Safari or Firefox.
 +
 
 +
==Accessing via USB cable==
 +
 
 +
The easiest way to access the GUI is through the USB cable. Simply connect the USB cable, which you received along with your MOD Duo, to your PC or Mac. The operating system should recognize the MOD Duo as a network device and configure it automatically. However, this process may fail in certain Windows versions, if that is your case please check the [[Troubleshooting|troubleshooting page]]
 +
 
 +
After successfully connecting the MOD Duo to your PC or Mac, open your favorite browser and navigate to http://modduo.local (or http://192.168.51.1).
 +
 
 +
 
 +
==Accessing via Bluetooth==
 +
 
 +
It is also possible to connect to your computer using a wireless Bluetooth connection. Check [[Bluetooth||this page]] to see how to do this!
 +
 
 +
=Getting Device Information=
  
==Info==
 
 
This section serves to give you information about the services running, the versions of the different pieces of software running on your MOD Duo, as well as the serial number attached to your MOD Duo.  
 
This section serves to give you information about the services running, the versions of the different pieces of software running on your MOD Duo, as well as the serial number attached to your MOD Duo.  
 +
 +
Press and hold the left knob for one second to open the '''SETTINGS''' menu, turn the knob to select the '''Info''' option and short press the knob to access the '''Info''' menu.
  
 
Enter the "Services" sub-menu to see the activated services:
 
Enter the "Services" sub-menu to see the activated services:
Line 160: Line 222:
 
*ttymidi
 
*ttymidi
  
Enter the "Versions" sub-menu to see the versions of:
+
Enter the '''Versions''' sub-menu to see the versions of:
 
*release
 
*release
 
*restore (hexadecimal)
 
*restore (hexadecimal)
Line 166: Line 228:
 
*controller (hexadecimal)
 
*controller (hexadecimal)
  
Enter the "Device" sub-menu to see the serial number of your MOD Duo.
+
Enter the '''Device''' sub-menu to see the serial number of your MOD Duo.
 
 
==Tuner==
 
By holding down the right knob for one second, you will go into tuner mode.
 
 
 
Changing the input being tuned can be done by clicking on the right knob once. By default the tuner is set to tune input 1.
 
 
 
Exiting the tuner is done by holding down the right knob for one second again.
 
  
 
=Hooking up the MOD Duo=
 
=Hooking up the MOD Duo=

Revision as of 23:41, 11 August 2018

This first chapter describes the MOD Duo in high detail. You will find information about the physical device, the device menu and how to control it, and how to hook up the device in your setup.

The MOD Duo when powered up
Side-shot of the MOD Duo

Overview

The wireframe images below expose the controls and inputs/outputs that the MOD Duo has.

Duo-overview.png

Device features

The following sub-sections give information about the different physical device features: the inputs, outputs, actuators, displays and finally the dimensions of the device.

Inputs and outputs

Duo-manual-2.png

To ensure a safe connection, follow the steps below.

  1. Turn down the volume of your amp and connect it to the OUTPUT jack(s)
  2. Connect your instrument(s) to the INPUT jack(s)
  3. Turn on the MOD Duo by plugging in its power adapter
  4. Wait until the MOD Duo boots up


Inputs jacks

The MOD Duo has two independant audio inputs, with configurable input gain for each input. You can set up the input gain through the device menu.

Output jacks

The MOD Duo has two independant audio outputs, with configurable output gain for each outut. You can set up the output gain through the device menu.

Headphone jack

The headphone output on the MOD Duo usually monitors output 1 and 2, although it can also be set up to monitor the inputs directly through the device menu. It is also possible to set the volume level of the headphone output through the device menu.

Power jack

The MOD Duo comes with its own approved power supply which outputs 12V, 2A over a center-positive barrel-type plug.

TODO: Add plug dimensions, minimum power requirements

The power consumption of the MOD Duo varies depending on the peripherals connected to the device. For example: Hooking up a USB-hub to the USB-A port, and then hooking up multiple MIDI controllers to the hub will change the power requirements. By using the provided power supply you are sure that you will never run out of juice.

Control Chain port

TODO: explain use for CC, advantage over MIDI

NOTE: Please do NOT connect this port to a regular Ethernet port, it can damage your MOD Duo.

USB Host port

In the most common scenario, this port is used to hook up a single USB-MIDI device, such as a MIDI-keyboard to control generator plugins.

Another common scenario is using this port to hook up a Bluetooth dongle for wireless connection to your PC.

NOTE: The port can also be split up into multiple ports using a USB-hub for connecting multiple USB devices to the MOD Duo.

USB computer port

This port is mostly used to connect the MOD Duo to your PC for setting it up. When executing a manual system update, its use changes to a mass-storage device, so that you can copy the update-file to the MOD Duo.

DIN-MIDI I/O

Finally, the MOD Duo also supports old-school DIN-MIDI devices, simply hook up your DIN-MIDI device to the appropriate port on the back and enjoy!

Actuators

The two knobs and two footswitches make up the actuators that are present on every MOD Duo.

The two knobs are used to access and navigate the device menu and tuner. They can also be freely mapped to the parameters of the plugins running inside the MOD Duo, through the web interface.

General knob actions

  • Turn a knob to change the value of the parameter assigned to it
  • Press a knob to cycle through the list of parameters assigned to it

Left knob actions

  • Hold the left knob to access and exit the device menu
  • Turn the left knob to scroll through the device menu
  • Press the left knob to enter the selected sub-menu or toggle the selected option

Right knob actions

  • Hold the right knob to access and exit the tuner
  • Press the right knob to change the input that the tuner is used for

The two footswitches can be used to navigate through the pedalboards that are inside a bank (when set up that way). They can also be freely mapped to the parameters of the plugins running inside the MOD Duo, through the web interface.

General footswitch actions

  • Press the footswitch to change the value of the parameter mapped to it

Switching pedalboards with the footswitches

When switching pedalboards with the footswitches is enabled through the web interface:

  • Press the left footswitch to load the previous pedalboard in the active bank
  • Press the right footswitch to load the next pedalboard in the active bank

Displays

The MOD Duo sports two large (2.8") LCD displays. The displays normally give dynamic information about the actions mapped to the device actuators, but they are also used for displaying the device menu and tuner.

Dimensions

  • width: 180 mm
  • length: 160 mm
  • height: 74.7 mm

LED Audio meters

The LED colors represent the following input levels:

  • Off: below -30dB
  • Green: between -30dB and -12dB
  • Yellow: between -12dB and -3dB
  • Red: above -3dB
  • Blinking strong red: 0dB (CLIPPING!)

Adjusting Volumes

The MOD Duo allows each input and output volume to be individually adjusted. To access the Volume and Gains menu, first press and hold the left knob for one second. The SETTINGS menu will show up, now turn the left knob to select the Volume and Gains option and finally short press the knob to access it.

Duo-manual-3.png

In the Volume and Gains menu, turn the knob to select the input or output you want to adjust and short press the knob to access it.

Inputs

The options for adjusting the inputs are Stage and Fine Adjust.

The Stage menu allows you to adjust the gain stage of the selected input. Inside of the Stage menu there are 3 options: Low, Mid and High, representing the following input gain levels:

  • Low = -22dB
  • Mid = -9.5dB
  • High = +3dB

You should select the gain stage that best applies to the instrument you have connected. Short press the knob to activate the selected gain stage.

Duo-manual-4.png

Once you have chosen the desired Stage value you can return to the previous menu by selecting the Back to ... option.

The Fine Adjust menu allows you to adjust the gain of the selected input. You should turn the knob until you get the desired value.

Duo-manual-5.png

Simply short press the knob to return to the previous menu.

Outputs

The Output menu has only one option, which allows you to adjust the attenuation of the respective output. Turn the knob to adjust the value. To return to the previous menu simply short press the knob.

Duo-manual-6.png

Headphone

In the SETTINGS menu you can access the Headphone option and adjust the volume of the headphone output. The volume can be adjusted from -33dB to +12dB.

Duo-manual-7.png

Simply short press the knob to return to the previous menu.

There is also the option to enable the Direct Monitoring. By enabling the direct monitoring the headphone will work as a monitor for the dry sound coming into the MOD Duo. To toggle the monitor between ON and OFF press the knob while the Direct Monitoring option is selected.

Duo-manual-8.png

Tuning

The MOD Duo has a built-in chromatic tuner which can be accessed by pressing and holding the right knob for one second. Both inputs can be used as the tuner input, to select between them short press the right knob. To exit the tuner press and hold the right knob for one second.

If you see a question mark on the tuner screen, it means the MOD Duo is not receiving any input.

Duo-manual-9.png

To tune a guitar, play an unfretted note on a string and tune it until you see the correct note on the display. When the background of the rectangle becomes black the string is in tune. Each vertical bar represents 10 cents. The first bar, to the right or left of the central rectangle, is filled when the signal is between 1-10 cents out of tune, the second bar when it is 11-20 cents out of tune, and so on, and so forth.

Duo-manual-10.png

Playing

After you have powered on and adjusted the volumes of your MOD Duo, it is ready for playtime. The MOD Duo comes with many pedalboards ready to be used. They are organised in banks and can be accessed via SETTINGS menu.

Loading a pedalboard

In order to load a pedalboard, first access the SETTINGS menu by pressing and holding the left knob for one second, then select the option Banks with a short press. (TODO: link to how to set up banks on GUI)

Duo-manual-11.png

Once you have the Banks menu open, you can select any bank according to your preference. The name of each bank should give you an idea of the style of the pedalboards it stores. A short press on the knob will open the selected bank showing the pedalboards inside of this bank.

Duo-manual-12.png

To load a pedalboard, make your selection by turning the knob, followed by a short press on the knob. Each time you load a pedalboard you can try how it sounds and once you find a pedalboard that you like, you can exit the Banks or Pedalboard menu by pressing and holding the left knob for one second.

Adjusting pedalboard parameters

As you might have noticed already, the default view of the displays shows the assigned parameters of the plugins for the current pedalboard. You will learn more about assigning parameters in the next chapter.

These parameters you see on the displays were considered important to be accessible to the user when the pedalboard is loaded. To adjust the value of each parameter you just need to turn the knob until the desired value is reached. More than one parameter can be assigned to the same knob, to cycle between them, short press the knob. On the top-right corner of each display you can see the index of the parameter being adjusted and the amount of assigned parameters on this display.

Duo-manual-13.png

After you have changed the values you might want to save or reset them. The reset will restore the last saved values for all assigned parameters, while the save option will save the current parameters values to the current pedalboard. To access these options, press and hold the left knob for one second to open the SETTINGS menu, then turn the knob moving the selection until Current pedalboard option and short press the knob to select it.

Duo-manual-14.png

Inside the Current pedalboard option there are two options: Save State and Reset State. Turn the knob to select the desired option, and short press the knob. Finally, confirm the action by selecting YES in the pop up dialog, and short pressing the knob. To exit this menu press and hold the left knob for one second.

Editing

Accessing the graphical interface

The MOD Duo has a built-in graphical user interface (GUI), which means you don’t need to download any extra software in order to configure the device. To access the interface, you only need a web browser, such as Chrome, Safari or Firefox.

Accessing via USB cable

The easiest way to access the GUI is through the USB cable. Simply connect the USB cable, which you received along with your MOD Duo, to your PC or Mac. The operating system should recognize the MOD Duo as a network device and configure it automatically. However, this process may fail in certain Windows versions, if that is your case please check the troubleshooting page

After successfully connecting the MOD Duo to your PC or Mac, open your favorite browser and navigate to http://modduo.local (or http://192.168.51.1).


Accessing via Bluetooth

It is also possible to connect to your computer using a wireless Bluetooth connection. Check |this page to see how to do this!

Getting Device Information

This section serves to give you information about the services running, the versions of the different pieces of software running on your MOD Duo, as well as the serial number attached to your MOD Duo.

Press and hold the left knob for one second to open the SETTINGS menu, turn the knob to select the Info option and short press the knob to access the Info menu.

Enter the "Services" sub-menu to see the activated services:

  • jack
  • mod-host
  • mod-ui
  • ttymidi

Enter the Versions sub-menu to see the versions of:

  • release
  • restore (hexadecimal)
  • system (hexadecimal)
  • controller (hexadecimal)

Enter the Device sub-menu to see the serial number of your MOD Duo.

Hooking up the MOD Duo

The MOD Duo has two completely independant inputs and outputs, as well as support for regular DIN-MIDI as well as USB-MIDI devices. It quickly becomes clear that many different possibilities exist for hooking up the MOD Duo in your setup.

In general, there are two scenarios for hooking up the MOD:

  1. At setup time, with a computer connected to create new pedalboards
  2. For live use, possibly without a computer connected

For the first scenario, the only connection that you need to make is from the USB B port on the MOD Duo to your computer. (Bluetooth is possible in case that is preferred)

For the second scenario, it is possible to remove the connection to the computer completely, the MOD Duo works perfectly fine as a standalone device!

Wiring examples

In the sections below you can find examples of setups that use the MOD Duo, split up into different categories.

Guitar

TODO: Add typical use cases with guitar

  1. in front of single amp, as stompbox
  2. in front of, and in fx loop of single amp
  3. into PA, with amp+cabsim on mod
  4. semi-accoustic setup

Vocals

TODO: Add typical use cases with vocals

  1. MIC -> MOD -> DI -> PA
  2.  ?

Keys

TODO: Add typical use cases with keys

  1. HW Synth -> MOD
  2. ePiano -> MOD
  3. keyboard -> MOD

MIDI

TODO: Add typical use cases with MIDI devices

  1. MIDI Keyboard/controller -> MOD -> OUT
  2. MIDI Keyboard/controller -> MOD -> HW Synth -> OUT
  3. MIDI Grid-controller -> MOD

Exotic

TODO: Add exotic use cases

  1. Chapman stick
  2. Wind instruments
  3. Accoustic instruments

Next chapter >