Troubleshooting Reinstall via LiveSuit

From MOD Wiki
Revision as of 11:13, 23 June 2017 by FalkTX (talk | contribs)
Jump to navigation Jump to search
Location of the FEL button on the MOD Duo

Installing MOD Duo via LiveSuit

WIP notes only

mention tool is not made by MOD

needs driver install

mod needs to be disconnected before starting livesuit?

Installing FEL mode USB driver

1. Press the windows key and 'R' at the same time to get the 'Run' dialog. Type "devmgmt.msc" and press enter. (This will open the Device Manager)
Winls 101 run-command.png


2. Find the MOD Duo device. It either appears as 'Duo Ethernet' under 'Unknown devices' or as a USB Serial device.
If you have 'Duo Ethernet' as unknown device, select it.
If not, expand the 'Ports (COM & LPT)' category and select 'USB Serial Device'.
Winls 102 unkown-device.png


3. Right click on the selected item and select 'Update Driver Software...'.
Winls 103 device-right-click.png


4. Select 'Browse my computer for driver software'
Winls 104 browse-pc-software.png


5. Click the 'Browse' button and select the folder where you extracted the contents of the mod-duo-rndis.zip file, then click 'Next'.
Winls 105 browse-pc-software 2.png


6. Wait for Windows to finish installing the driver.
Winls 106 driver-noverify.png


7. That's it! The driver is installed. :)
Winls 107 driver-done 1.png


8. If everything is working correctly, the Duo will appear as 'USB Ethernet/RNDIS Gadget' under 'Network adapters'
Winls 108 driver-done 2.png

Deploying LiveSuit image

Winls 201 livesuit window.png

Winls 202 firmware-tab.png

Winls 203 connected-question-format.png

Winls 204 format-in-progress.png

Winls 205 format-completed.png