Difference between revisions of "Troubleshooting Reinstall via LiveSuit"

From MOD Wiki
Jump to navigation Jump to search
Line 56: Line 56:
 
== Deploying LiveSuit image ==
 
== Deploying LiveSuit image ==
  
 +
'''1.''' Double-click on the PhoenixSuit file to open it. The application looks like this:
 +
<br clear=all>
 
[[File:winls_201_livesuit_window.png]]
 
[[File:winls_201_livesuit_window.png]]
  
 +
 +
'''2.''' Download...<br>
 +
Click on the Firmware tab.<br>
 +
Click on the 'browse' button and ...
 +
<br clear=all>
 
[[File:winls_202_firmware-tab.png]]
 
[[File:winls_202_firmware-tab.png]]
  
 +
 +
'''3.''' When asked ..., click 'yes'.
 +
<br clear=all>
 
[[File:winls_203_connected-question-format.png]]
 
[[File:winls_203_connected-question-format.png]]
  
 +
 +
'''4.''' Wait while the deploy takes place.
 +
<br clear=all>
 
[[File:winls_204_format-in-progress.png]]
 
[[File:winls_204_format-in-progress.png]]
  
 +
 +
'''5.''' Deploy should complete in about 30 seconds.
 +
<br clear=all>
 
[[File:winls_205_format-completed.png]]
 
[[File:winls_205_format-completed.png]]
 +
 +
The MOD Duo will automatically boot into restore mode after the deploy.<br>
 +
Grab the latest release image from [Releases] and copy it to the mass storage device as usual for MOD updates.<br>
 +
Note that for LiveSuit deploys, version 1.4 or higher is required.

Revision as of 12:22, 23 June 2017

Location of the FEL button on the MOD Duo

Installing MOD Duo via LiveSuit

WIP notes only

mention tool is not made by MOD

needs driver install

mod needs to be disconnected before starting livesuit?

Installing FEL mode USB driver

1. Press the windows key and 'R' at the same time to get the 'Run' dialog. Type "devmgmt.msc" and press enter. (This will open the Device Manager)
Winls 101 run-command.png


2. Find the MOD Duo device. It should appear as 'Unknown device' under 'Other devices' like the image below shows.
Winls 102 unkown-device.png


3. Right click on the selected item and select 'Update Driver Software...'.
Winls 103 device-right-click.png


4. Select 'Browse my computer for driver software'
Winls 104 browse-pc-software.png


5. Click the 'Browse' button and select the folder where you extracted the contents of the LiveSuit1.0.7.zip file, then click 'Next'.
Winls 105 browse-pc-software 2.png


6. Wait for Windows to finish installing the driver.
Windows might complain that it can't verify the publisher of this driver. You'll have to click to install anyway.
(This is because, as previously stated, this software was not done by the MOD Team)
Winls 106 driver-noverify.png


7. That's it! The driver is installed. :)
Winls 107 driver-done 1.png


8. If everything is working correctly, the Duo will appear as 'USB Device(VID_1f3a_PID_efe8)' under 'Universal Serial Bus controllers'
Winls 108 driver-done 2.png

Deploying LiveSuit image

1. Double-click on the PhoenixSuit file to open it. The application looks like this:
Winls 201 livesuit window.png


2. Download...
Click on the Firmware tab.
Click on the 'browse' button and ...
Winls 202 firmware-tab.png


3. When asked ..., click 'yes'.
Winls 203 connected-question-format.png


4. Wait while the deploy takes place.
Winls 204 format-in-progress.png


5. Deploy should complete in about 30 seconds.
Winls 205 format-completed.png

The MOD Duo will automatically boot into restore mode after the deploy.
Grab the latest release image from [Releases] and copy it to the mass storage device as usual for MOD updates.
Note that for LiveSuit deploys, version 1.4 or higher is required.