Difference between revisions of "Device Settings"

From MOD Wiki
Jump to navigation Jump to search
(adding screenshot placeholders)
(System menu)
Line 115: Line 115:
 
You can have up to four User Profiles. The first step to save a new user profile is to choose which from these four profiles will be overwritten.  
 
You can have up to four User Profiles. The first step to save a new user profile is to choose which from these four profiles will be overwritten.  
  
# Sitch to the profile you want to overwite
+
# Sitch to the profile you want to overwrite
# Navigate to System Settings and change values for Input, Output and Sync an MIDI settings
+
# Navigate to System Settings and change values for Input, Output, and Sync an MIDI settings
 
# Navigate back to the User Profiles menu
 
# Navigate back to the User Profiles menu
 
# On the right screen, select the "Overwrite Current Profile" option
 
# On the right screen, select the "Overwrite Current Profile" option
Line 124: Line 124:
  
 
= System =
 
= System =
 +
 +
SCREENSHOT -> System menu (right screen)
 +
 +
== Inputs ==
 +
 +
SCREENSHOT -> Inputs settings
 +
 +
This menu allows you to control Input gains.
 +
 +
'''Stereo Link''': If on, input gains for both channels will be linked and changes applied to one channel will also be applied to the other one.
 +
'''Input 1 and Input 2 Gain''': Navigate to one of these options and press the right knob to select which one you want to change. Turn the knob to change the value and press it again to exit edit mode.
 +
 +
== Outputs ==
 +
 +
SCREENSHOT -> outputs settings
 +
 +
This menu allows you to control Output volumes.
 +
 +
'''Stereo Link''': If on, output volumes for both channels will be linked and changes applied to one channel will also be applied to the other one.
 +
'''Output 1, Output 2, and Headphone Volume''': Navigate to one of these options and press the right knob to select which one you want to change. Turn the knob to change the value and press it again to exit edit mode.
 +
 +
== Sync & MIDI ==
 +
 +
SCREENSHOT -> Sync & MIDI settings
 +
 +
TODO
 +
 +
== Bluetooth ==
 +
 +
SCREENSHOT -> system Bluetooth
 +
 +
This option displays several Bluetooth information and allows you to turn on the Discovery mode.
 +
 +
'''Enable Discovery''': Select the option to turn on the Bluetooth discovery mode. After confirmation, your device will be visible for two minutes.
 +
 +
SCREENSHOT -> bluetooth discovery confirmation
 +
 +
 +
== Display Brightness ==
 +
 +
SCREENSHOT -> Display brightness
 +
 +
Press the right knob to change the LCD displays brightness. Each click will change between the available options:
 +
 +
* 0% (off)
 +
* 25%
 +
* 50%
 +
* 75%
 +
* 100%
 +
 +
== Info ==
 +
 +
This section displays several information about your device:
 +
 +
Services: The status of the different services running
 +
Versions: Version of MOD software
 +
Device: The serial number of your device
 +
 +
SCREENSHOTS -> each screen in info
 +
 +
Note: You can also access this information in the [[MOD_Web_GUI_User_Guide#System_Information|Web GUI Settings page]]
 +
 +
== System Upgrade ==
 +
 +
This option is only meant to be used for maintenance purposes. In a regular situation, all software upgrades will be performed via the Web GUI interface.
 +
 +
If you need to run a manual upgrade, use this option. See [[Releases#Manual_update|Manual upgrade]] for more details.
 +
 +
==

Revision as of 14:40, 9 September 2019

This page is under construction and applies to devices on version 1.7+

This page holds the information on how to use the Settings menu on your MOD Duo and MOD Duo X devices.

Overview

These are the Settings you can access and control directly in your device, even when you are disconnected from your computer:

  • Banks: Navigate your Banks of pedalboards
  • Current Pedalboard: Restore default state or save a new state for the current pedalboard
  • Hardware Bypass: Control hardware bypass
  • Tempo & Transport: Control Tempo & Transport settings
  • Tuner: Access tuner and configure whether it should mute the outputs or not
  • User profiles: Manage User Profiles
  • System: Access system-wide settings and information such as inputs and outputs gains, Bluetooth configuration and more.

SCREENSHOT -> Settings Menu (left screen)

Accessing and navigating the Settings Menu

Press and hold the left endless knob to open the Settings Menu.

On the left screen you will see the main menu. The right screen will display the sub-menu related to the current item selected on the main menu.

SCREENSHOT -> both screens in the Banks menu

Scroll the options in the main menu by rotating the left knob. Some options have a toggle indicator that can be triggered by quick pressing the left knob. These options have a "[ ]" or "[x]" indicating the state of the toggle. For example, the Hardware Bypass can be turned on or off by pressing the left knob.

Scroll the sub-options using the right knob. Quick press the right knob to access a third level menu or to just turn on and off the selected option.

SCREENSHOT -> third level menu. Output or input settings

Press and hold the left knob again to exit the Settings Menu.

Banks

Current Pedalboard

SCREENSHOT -> Current pedalboard menu

This option allows you to restore the default state of the pedalboard, or to override it with the current state.

Selecting the "Restore default" option on the right screen will discard any changes you might have made to any parameter of any plugin and restore the state of the pedalboard as it was the last time it was saved.

Selecting the "Save state" option on the right screen will save the current state of all parameters of all plugins. Next time you load the pedalboard or choose the "Restore default" option, the pedalboard will go back to this state.

Note: You can only access these setting when you are disconnected from your computer.

Hardware Bypass

SCREENSHOT -> Hardware bypass (both screens)

Both MOD Duo and MOD Duo X have a true bypass circuit for each pair of input/output. This allows you to physically connect input 1 to output 1, and input 2 to output 2. The true bypass is enabled when the device is off and it is automatically disabled after the current pedalboard is loaded.

This option allows you to quickly activate the Hardware bypass to both channels or independently bypass each channel.

Quick bypass

Quick press left knob to quickly turn Bypass on and off. On the left screen you will see "Bypass [ ]" indicating that the bypass is off or "Bypass [x]" indicating that the bypass is on.

Hardware Bypass options

On the right-hand screen you can turn bypass on and off independently for channels 1 and 2 or for both.

You can also change the behavior of the "Quick bypass" by changing the last option called "Quick Bypass Channel(s)". You can set it so "Quick bypass" will bypass both channels (default) or only one of the two channels.

Tempo & Transport

SCREENSHOT -> Tempo & Transport (both screens)

Tuner

SCREENSHOT -> Tuner (both screens)

Note: You can quickly access the Tuner by pressing and holding the right-hand knob any time.

This option allows you to tune your instrument. Both inputs can be used as the tuner input, to select between them short press the right knob.

If you see a question mark on the tuner screen, it means the MOD Duo is not receiving any input.

Choosing whether the tuner should mute the outputs when activated.

In the main menu there is an indicator "Mute [x]" that you can toggle to mute your outputs or not when tuning. Short press the left knob to change this value.

When you quick access the Tuner by pressing and holding the right knob, you have to press and hold the same knob again to exit.

User Profiles

User Profiles allow you to switch between pre-configured device settings.

Say you use your device sometimes to play with your guitar and microphone, in the studio, and sometimes with a synth in a live performance. For each situation, you might need to have different Input and Output gains and volume settings. So a user profile can be used to quickly switch between setups.

The settings that can be stored in a User Profile are:

  • Input settings: Everything under System > Inputs
  • Output settings: Everything under System > Outputs
  • Sync and MIDI settings: Everything under System > Sync and MIDI

Factory User Profiles

TODO: Describe here the default User profiles that come pre-configured from the factory. What are the values and what are they for.

Switching between User Profiles

On the left screen, navigate to the "User Profiles" menu. On the right screen, the 4 User profiles (A, B, C, and D) will be displayed. The current selected user profile will be marked with a checkbox "[x]".

SCREENSHOT -> User Profiles menu (both screen)

With the right knob, navigate through the profiles and short press the knob to select the profile you want. Confirm the change.

SCREENSHOT -> change profile confirmation screen

Saving a new User Profile

You can have up to four User Profiles. The first step to save a new user profile is to choose which from these four profiles will be overwritten.

  1. Sitch to the profile you want to overwrite
  2. Navigate to System Settings and change values for Input, Output, and Sync an MIDI settings
  3. Navigate back to the User Profiles menu
  4. On the right screen, select the "Overwrite Current Profile" option
  5. Short press the right knob to select this option and confirm

SCREENSHOT -> overwrite user profile confirmation

System

SCREENSHOT -> System menu (right screen)

Inputs

SCREENSHOT -> Inputs settings

This menu allows you to control Input gains.

Stereo Link: If on, input gains for both channels will be linked and changes applied to one channel will also be applied to the other one. Input 1 and Input 2 Gain: Navigate to one of these options and press the right knob to select which one you want to change. Turn the knob to change the value and press it again to exit edit mode.

Outputs

SCREENSHOT -> outputs settings

This menu allows you to control Output volumes.

Stereo Link: If on, output volumes for both channels will be linked and changes applied to one channel will also be applied to the other one. Output 1, Output 2, and Headphone Volume: Navigate to one of these options and press the right knob to select which one you want to change. Turn the knob to change the value and press it again to exit edit mode.

Sync & MIDI

SCREENSHOT -> Sync & MIDI settings

TODO

Bluetooth

SCREENSHOT -> system Bluetooth

This option displays several Bluetooth information and allows you to turn on the Discovery mode.

Enable Discovery: Select the option to turn on the Bluetooth discovery mode. After confirmation, your device will be visible for two minutes.

SCREENSHOT -> bluetooth discovery confirmation


Display Brightness

SCREENSHOT -> Display brightness

Press the right knob to change the LCD displays brightness. Each click will change between the available options:

  • 0% (off)
  • 25%
  • 50%
  • 75%
  • 100%

Info

This section displays several information about your device:

Services: The status of the different services running Versions: Version of MOD software Device: The serial number of your device

SCREENSHOTS -> each screen in info

Note: You can also access this information in the Web GUI Settings page

System Upgrade

This option is only meant to be used for maintenance purposes. In a regular situation, all software upgrades will be performed via the Web GUI interface.

If you need to run a manual upgrade, use this option. See Manual upgrade for more details.

==